Specifications Aloha 27 (8.2)

Disclaimer:

Please Note, during the lengthy production runs of the A27 (8.2) and A28 (8.5), Ouyang Boatworks used a number of different mast and sail suppliers and specifications with differing mast and boom lengths. We are not aware of similar variations in the A30 and A32 models, but it is always possible. With this in mind, please do not rely on the measurements provided if you have to pass under an overhead obstruction (eg bridge or powerlines) where clearance will be limited, when ordering sails or establishing a racing handicap. If you require accurate numbers for any of these purposes we strongly recommend you measure your actual boat and we accept no responsibility for the consequences of any inaccuracies in the quoted figures, or in variations applying to your boat.


 
General Hull Specs Aloha 8.2
 
BuilderOuyang Boat Works
LocationWhitby, Ontario
YearApprox 1976 - 1987
DesignerRobert Perry
TypeSloop
Displacement5200 lbs
Ballast2000 lbs
ConstructionFibreglass
Fuel Tank Capacity12 gals (US)
Fresh Water Capacity14 gals (US)
Holding Tank Capacity24 gals (US)
Length Overall26' 9"
Length Waterline22' 2.5"
Beam9' 6"
Draft4' 4"
SteeringTiller (Wheel optional)
Bridge Clearance Height (approx)40' 0"
Mast StepDeck
Keel TypeFixed Fin Encapsulated Ballast
Main Sail164 sq. ft. (E= 10.25') P 31.75'
Main Sail178 sq. ft. (E= 11.25') P 31.75'
Jib161 sq. ft. E (to approx 1981) 10.25'
Jib161 sq. ft. E (1981 onwards) 11.25'
Genoa241 sq. ft. I 30.00'
 
Engine
 
Engine TypeInboard Diesel (or Outboard )
Number of cylinders1 or 2
HorsePower7 or 12
Inboard MakeBMW, Volvo or Westerbeke
Prop shaft size1 inch
 
Aloha 27 (8.2) Ratings & Ratios
 
PHRF Rating
No Flying Sails Inboard231
No Flying Sails Outboard219
With Spinnaker Inboard213
With Spinnaker Outboard201
Displacement/Waterline Length (D/L)211
Sail Area/Displacement (SA/D)18.1
Ballast Ratio (BR)38%
Theoretical Hull Speed (HSPD)6.32 knots
 
 
 
 
Joomla 1.5 Templates by Joomlashack