Specifications Aloha 32


Please Note, during the lengthy production runs of the A27 (8.2) and A28 (8.5), Ouyang Boatworks used a number of different mast and sail suppliers and specifications with differing mast and boom lengths. We are not aware of similar variations in the A30 and A32 models, but it is always possible. With this in mind, please do not rely on the measurements provided if you have to pass under an overhead obstruction (eg bridge or powerlines) where clearance will be limited, when ordering sails or establishing a racing handicap. If you require accurate numbers for any of these purposes we strongly recommend you measure your actual boat and we accept no responsibility for the consequences of any inaccuracies in the quoted figures, or in variations applying to your boat.

General Hull Specs Aloha 32
BuilderOuyang Boat Works
LocationWhitby, Ontario
YearApprox 1979 - 1988
DesignerMark Ellis
Displacement9800 lbs
Ballast4000 lbs
Fuel Tank Capacity20 gals (Imperial)
Fill location?
Fresh Water Capacity60 gals (Imperial)
Holding Tank Capacity30 gals (Imperial)
Length Overall32.5
Length Waterline25'
Beam10' 10"
Draft4' 9"
Bridge Clearance Height (approx)46'
Mast StepKeel
Keel TypeFin bolted
Main Sail213 sq. ft. P 35.5'
Jib228 sq. ft. E 12'
Genoa 150%464 sq. ft. I 42'
Spinnaker? sq. ft. J 14.5'
Engine TypeInboard Diesel
Number of cylinders2
HorsePower16 or 21
Inboard MakeUniversal or Westerbeke
Cooling systemFresh water
Prop shaft size?
Aloha 32 Ratings & Ratios
PHRF Rating
No Flying Sails189
With Spinnaker171
Displacement/Waterline Length (D/L)280
Sail Area/Displacement (SA/D)18.1
Ballast Ratio (BR)41%
Theoretical Hull Speed (HSPD)6.70 knots
Joomla 1.5 Templates by Joomlashack