Author Topic: A28 keel work  (Read 75 times)

Laskadog

  • Member
  • *
  • Posts: 29
A28 keel work
« on: September 30, 2019, 03:51:12 PM »
Hello all,

I am going to haul out my A28 in a couple of weeks and was planning on doing a small repair on the underside of the keel.  There seems to be a little de-lamination or something. I will probably add a couple of strips of glass along the bottom and leading edge while I'm at it.  Working on the underside of the keel while on its cradle presents a few challenges. My plan is to support the front half while working on the rear and then support the rear half while working on the front half.  I believe that the lead is in the front half.  Does anyone know if I can support the boat on the back half, that is just glass?

Thanks,